Three details to pay attention to when accepting the jack:

First, after the arrival of the jack, we should first look at the nameplate information of the jack, because the nameplate of the jack is marked with the manufacturer, brand, rated load, production batch number and other information of the product. We should judge whether the jack is the one we purchased at the first time to avoid the manufacturer's mistake.

Second, after confirming that there is no problem with the jack information, a comprehensive inspection should be carried out on the jack, that is, the quality inspection should be carried out on each department of the machine body, and the paint peeling, deformation, cracks and other problems should be observed as far as possible. If it is a hydraulic jack, pay special attention to whether there is oil leakage.

Third, after a comprehensive inspection of the jack, it is necessary to carry out a no-load test run, that is, press the handle when the jack does not carry any heavy objects, observe whether the jack can rise and fall smoothly, and eliminate the difficulty and noise in the lifting process.

After the inspection in the above three aspects, the acceptance process is finished.