Most private cars are equipped with car jacks, and the selection of car jacks also needs to be adjusted according to different car models. Many people are not very familiar with which type of jack is more suitable for their car. Today, Guanhang mainly analyzes from the perspective of load, and recommends which specifications of jacks to use for different car models.

The most common vehicle weights are between 1400KG and 1500KG, with a car weight of 2.0 or above, such as the Ruizhi 2.5 (1560kg), Camry 2.4 (1530kg), Guangben 2.4 (1447kg), Malibu 2.3 (1437kg), and Teana 2.3 (1545kg). The self weight of this type of vehicle model does not have much fluctuation, and the vehicle weight is basically around 1.5T, so using a two ton jack is sufficient.

Some of the more luxurious D-class models, such as the Audi A8L, Mercedes Benz S-Class, and BMW 7 Series, weigh around 2.3T or less compared to B-class cars, so it is recommended to use a 3T jack. In addition, there are also some special large SUVs and vehicles such as trucks. These vehicles have a relatively larger self weight and a higher chassis, and for these vehicles, Crown Airlines recommends using horizontal jacks with higher rated loads instead of traditional scissor jacks.

Horizontal jacks have a higher rated load and a higher lifting height, allowing them to exert greater advantages when facing vehicles with higher chassis. This is why different choices are made for jacks for different vehicles.