Scissor jack is a must-have lifting tool for travel and cars. Its design structure is simple, easy to carry, and can solve a series of problems on its own in emergency situations. Nevertheless, some people still complain that the design of the jack is unreasonable and difficult to use.

Actually, it's not that the design of the jack is unreasonable, but that the usage method of the jack is incorrect. Today, we will teach you the correct usage method of the jack.

Firstly, align the groove on the jack with the top plate under the vehicle beam, and manually rotate the bolt until it cannot be turned.

Next, use the hand rod matched with the scissor jack to hook onto the circular hole on the side of the jack. Insert the other end of the hand rod into the hole of the socket wrench, and then hold the hand rod with one hand while turning the wrench with the other hand. This way, you can easily lift the roof of the car.

If the hand lever is used to rotate back and forth, it is not only inefficient but also labor-intensive. As long as the usage method is mastered, the scissor jack will be very easy to use.

I hope this little trick of using a scissor jack can be helpful to everyone. If you have any questions, feel free to consult at any time.