Horizontal jacks are small in size, light in weight, and have a high load-bearing capacity. They are commonly used in the automotive repair industry, such as when replacing tires on a car. When replacing tires, where should the horizontal jack be placed on the car?

Generally, there is a raised position on the side beam near the car tire, which is the dedicated lifting position of the jack, which can facilitate users to quickly perform lifting operations. If it cannot be found, it can be said to conduct multiple tests to find the balance point supported by the car, ensuring that the entire car maintains balance and facilitating the user's tire replacement operation.

After fixing the vehicle, place a horizontal jack on a hard and flat surface. If the car breaks down on soft ground or gravel, a hard wooden board or brick can be used to cushion under the jack to ensure the support angle of the jack. After determining the support point, we need to insert the pressure rod into the sleeve in front of the jack, manually press the rod repeatedly, and push the car to the appropriate height to stop the pressure. At this point, we can replace the tire.

After replacing the tire, rotate the screw switch counterclockwise to release the pressure and reset the jack, and the horizontal jack can complete the task.