The lathe equipment in the factory workshop is generally above the tonnage level, which makes the handling and adjustment of these equipment face great difficulties. How does the claw jack work with the handling tank truck.

Firstly, the handling of such equipment requires the handling tools to have sufficient load capacity, and as a model of lifting equipment, claw jacks have no problem with load capacity, as long as the specifications are sufficient. The load capacity of handling tanks can reach astonishing tens or even hundreds of tons, and if used in combination, the load capacity is even greater.

The difficulty of lifting lathe equipment lies not in weight, but in the ground clearance. The extremely narrow ground clearance does not have the possibility of accommodating traditional jacks, while claw jacks are different. The structure of claw jacks is relatively special. When facing this situation, attachments can be used for lifting. After lifting to a certain height, the transport tank can be pushed down to carry the load.

Using claw jacks and transport tanks to lift multiple points of the lathe equipment, and then maintaining the overall balance of the lathe equipment by placing multiple transport tanks, after ensuring the stability of each support point, the lathe can be easily transferred.